ABSTRACTS DOWNLOAD
 

SPECIAL SESSIONS
SPECIAL SESSION S1: Practical Lessons and Challenges from Waste to Energy Experiences

Current status and issues of WTE projects in Thailand   
Dr. So Sasaki, Chuo University / Chulalongkorn University,
Mr. Takeshi Nimura, Nippon Steel & Sumikin Engineering Co., Ltd.
Waste to Energy in Phuket
Mr Tavorn Jirapattanasopon, the deputy Mayor of Phuket City Municipality
Major Challenges in Development and Implementation of WtE Projects in Thailand
Mr. Patarapol Tularak, Solid Waste Management Association (Thailand)
Essence of waste management facility development & support by the Consultant ~From example of incineration facility in Japan
Mr. Taisuke Odera, Eight-Japan Engineering Consultants Inc.

SPECIAL SESSION S2:Disaster Waste Management in Asia and the Pacific
Introduction of the session and disaster waste management guideline
Prof. Misuzu Asari, Kyoto University or Makoto Tsukiji, JSMCWM
Development of Regional disaster waste management guideline in the Pacific
Mr. Faafetai Sagapolutele, Assistant Chief Advisor, J-PRISM-II, JICA
tbc
Mr. Nelson Anaia, Principal Disaster Officer MECDMM, Solomon Islands
Development of disaster waste management plan and policies in Nepal
Dr. Sumitra Amataya, Chairperson, LEAD Nepal
Future prospective of “Disaster Waste Management in Indonesia - Government Regulation on Specific Solid Waste Management and DWM
Ms.Tunjung Puitika, Section Head, Ministry of Environment and Forestry
International cooperation and dissemination of disaster waste management guidelines
Mr. Mahesh Pradhan, Programme Management Officer, UN Environment (United Nations Environment Programme)

SPECIAL SESSION S3:  3R Policy Indicators and Its Future Challenges – Based on the experience of 1st State of the 3Rs in Asia and the Pacific
Session Keynote: SDG 11 (City) and 12 (Sustainable Consumption and Production) and Regional 3R Forum in Asia and the Pacific: How to accelerate implementation of SDGs in Asia and the Pacific region.
Mr. Choudhury Rudra Charan Mohanty (Environment Programme Coordinator, United Nations Centre for Regional Development (UNCRD))
1st State of the 3Rs in Asia and the Pacific Report
Dr. Y. Hotta (Institute for Global Environmental Strategies (IGES), Japan)
Challenges and Possible Future Priorities for Science and Data base for 3R Policy Assessment at Regional Level
Liu (Institute for Global Environmental Strategies (IGES), Japan)
Implementing 3R Indicators in Pacific Island Countries
Ma Bella Buinto, SPREP
Recapping 1st Round and Prioroties for 2nd Round
Prof. Shinichi Sakai, Kyoto University
Prof. Agamuthu Paiatamby, University of Malaya

SPECIAL SESSION S4: CCETs Waste Management Guidelines Development
Challenges and Key Factors in Advancing Environmentally Sound Management of Wastes in Asia and the Pacific
Dr. Shunichi Honda, UNEP
Introduction of the CCET and waste management guidelines activity
Mr. Kazunobu Onogawa, CCET
Development of the framework of CCET Guideline Series on MSWM
Dr. Chen Liu, IGES
Guideline Development on Mechanical Biological Treatment (MBT)
Dr. Tomonori Ishigaki, NIES
Guideline Development on Anaerobic Digestion for MSWM
Dr. Andante Hadi Pandyaswargo, Waseda University
Guideline Development on Waste-to-Energy from MSW incineration
Prof. Katsuya Kawamoto, Okayama University

SPECIAL SESSION S5: Plastic Material Cycles and their Management
Status of Marine Plastic Debris: Issues, Challenges and Global Initiatives Agamuthu Pariatamby, University of Malaya, Malaysia
3Rs Policy and plastic waste management in Thailand
Chavalparit, Chulalongkorn University, Bangkok, Thailand
3R plus concept for plastic materials management
Shinichi Sakai & MOEJ, Japan
3R challenges and experiences on plastic containers and packages
Yoshinori Suga, Embassy of Japan, Bangkok, Thailand
Marine Plastic Debris Status in Indonesia
Reza Cordova, Research Center for Oceanography (RCO), Indonesian Institute of Sciences
Comparative Analysis of Plastic Waste Management and Circular Economy Policy in ASEAN Countries
Yasuhiko Hotta, Magnus Bengtsson (Institute for Global Environmental Strategies; IGES)


SESSION 1: 3R and SDG Policies

Design for a circular economy – some comments about implementing a successful concept     
Heinz-Georg Baum, Fulda University of Applied Sciences, Germany
Optimizing integrated solid waste management system for a tourism destination in Hoi An city, Vietnam: A sustainability approach               
Song Toan Pham Phu, Okayama University, Japan
Effect measurement of waste separation at source program in Da Nang city, Vietnam
TRAN Vu Chi Mai, Okayama University, Japan
Time series change of municipal waste management flows in Austria
Rokuta Inaba, National Institute for Environmental Studies, Japan

SESSION 2 : Characterization of Industrial and Hazardous Waste
Estimation on hazardous characteristics of the components from spent linear LED lamps
Seung-Whee Rhee, Kyonggi University, Korea
Content and sources of metals in incinerated industrial waste             
Masahiro Oguchi, National Institute for Environmental Studies, Japan
Emission of polychlorinated biphenyls (PCB) from PCB waste storage sites   
Yasuhiro Hirai, Kyoto University, Japan
Global management of construction and demolition and disaster waste
Agamuthu Pariathamby, University of Malaya, Malaysia

SESSION 3: Characterization and Valorisation of Organic Waste
Characterization of oil palm waste products
Bence Babinszki, Hungarian Academy of Sciences, Hungary
Composition of the liquid phase products of rape straw formed during torrefaction    
Zoltán Sebestyén, Hungarian Academy of Sciences, Hungary
The chemical effects of torrefaction of biomass and its impact on enzymatic hydrolysis
Zsuzsanna Czégény, Hungarian Academy of Sciences, Hungary
Utilization of organic municipal solid waste in the production of tiles              
Vo Dinh Long, Industrial University of Ho Chi Minh City, Vietnam

SESSION 4: Case Studies of Promotion of 3R and SDGs
International comparison on attitudes towards food wastage              
Kohei Watanabe, Teikyo University, Japan
Review on current state of CDW management in Southeast Asian countries    
Han Hoang, National Institute for Environmental Studies, Japan
The role of the MRF in Indonesia’s waste management system (Case Study of the “Kartamantul” Territory, Special Province of Yogyakarta, Indonesia)   
Hijrah Purnama Putra, Universitas Islam Indonesia, Indonesia
Policy Options for Preventing and Reducing Food Waste in Bangkok
Chen Liu, IGES, Japan

SESSION 5: Practices of Industrial and Hazardous Waste Management
Towards large-scale production of bio-succinic acid: Most promising second generation feedstocks and optimized fermentation and purification strategies
     
Manuel Pinelo, Technical University of Denmark, Denmark
Phosphate removal by using waste oyster shell
Thanh-Tham Tran, Taiwan Tech (NTUST), Taiwan
A waste composition survey of spray cans and cassette cylinder from households in Kyoto
Junya Yano, Kyoto University, Japan
Environmental impact of hazardous waste disposal at a cement plant in India – A case study of acid tar sludge trial
Rahul Baidya, Jadavpur University, India

Session 6 : Biological Treatment of MSW
Oxygen profiles in waste pile by biological reaction during bio-drying process in tropical Asia               
Satoru Ochiai, Hokkaido University, Japan
Effect of air suction variation on pre-treated waste in bio-drying process
Panida Payomthip, King Mongkut’s University of Technology Thonburi, Thailand
Methane emission from windrow typed mechanical biological treatment in tropical climate    
Noppharit Sutthasil, National Institute for Environmental Studies, Japan
Assessment of municipal solid waste based biogas plants in India       
Munish Kumar Chandel, Indian Institute of Technology Bombay, India

SESSION 7: Challenges for Appropriate Waste Management
Rising the concern of marine plastic issues: How will an international regime deal with this global environmental issue?
Fusanori Iwasaki, Economic Research Institute for ASEAN and East Asia, Indonesia
Comparison of characteristics of refuse collection vehicles (RCVs) in Japan, Singapore and Europe and its recent discussion for ISO standardization 
Rieko Kubota, National Institute for Environmental Studies, Japan
Fossil carbon fraction of diaper in Japan
Thet Ko Win, Kyoto University, Japan
Estimation of fossil carbon fraction in paper waste and carbon fraction in plastic waste based on a household waste composition survey
Seiya Oyama, Kyoto University, Japan
Marine plastic debris in selected islands in Malaysia: Anthropogenic activities and its impact to plastic waste abundance
Fauziah Shahul Hamid, University of Malaya, Malaysia

SESSION 8: Recovery Process on Industrial and Hazardous Waste
Regeneration of waste activated carbon disposed from mercury recovery process
       
Soo Jin Cho, Yonsei University, Korea
Treatment of mine waste water containing As and Fe by Mg-Al layered double hydroxide aiming at sludge volume reduction      
Xinyi Yang, Tohoku University, Japan
Effect of anions on recovery of copper, nickel and water from electroplating wastewater in electrodialysis process         
Eunjoo Oh, Konkuk University, Korea
A study for two-step metal carbonation CCUS process based on seawater based industrial wastewater
Injun Kim, Yonsei University, Republic of Korea
Utilization of resources in ferro alloy plant
Rajarshi Chakraborty, Guru Nanak Institute of Technology, India

SESSION 9: Waste Landfill & Disposal
Environmental significance of heavy metal in leachate from different types of landfill in Malaysia
Kenichi Yoneda, Kawasaki City & Tokyo University of Agriculture and Technology, Japan
Arsenite sorption capabilities of landfill soils from Malaysia             
Munirah Hussein, Universiti Teknologi Malaysia, Malaysia
Mitigation of methane emission from municipal solid waste landfill using biological filters with different media              
Chart Chiemchaisri, Kasetsart University, Thailand
Characterisation of the fine fraction obtained from municipal solid waste dumpsite and its reclamation potential evaluation       
Munish Kumar Chandel, Indian Institute of Technology, Bombay, India
Analysis of consumption and disposal of plastic products to discuss plastic waste management in Pacific Island countries
Megu Tsuchimura, Kyoto University, Japan

SESSION 10: Environmental Safety of Thermal Treatment and Waste to Energy Facilities
Control of chlorine and elemental distribution in the municipal solid waste incineration process
Shigenori Iino, Tokyo Metropolitan Research Institute for Environmental Protection, Japan
Stabilization of mercury contaminated waste – fly ash from municipal solid waste/ hospital waste incinerators  
Soo-Jin Cho, Yonsei University, Korea
Preliminary study on mineralogical immobilization of heavy metals in municipal solid waste incineration fly ash           
Hiroki Kitamura, National Institute for Environmental Studies, Japan
Carbon dioxide capture with utilizing heavy metal ions in municipal solid waste fly ash            
Juhee Son, Yonsei University, Korea
Study on location of solid waste incineration plant with new energy recover facility in Japan
Naohiro Goto, Toyo University, Japan

SESSION 11: E-Waste Recycling & Management
Recovery of bisphenol A from discarded mobile phone         
Trung Hai Huynh, Hanoi University of Science and Technology, Vietnam
Estimation of material volume from discarded large home appliances            
Duc Quang Nguyen, Hanoi University of Science and Technology, Vietnam
Bioleaching for the recovery of Au and Ag from electronic waste facilitated by metal resistant heterotrophic bacteria   
Minimol M., National Institute of Technology Karnataka, India
Inhalation bioaccessible concentration and bioaccessibility of flame retardants in floor dust from E-waste processing workshop in northern Vietnam             
Tatiya Wannomai, Tokyo Institute of Technology, Japan
Recovery of Indium from extractant solutions of waste Indium Tin Oxide (ITO) by aluminum cementation        
Jenni Lie, Taiwan Tech (NTUST), Taiwan

SESSION 12:  Development of Thermal Treatment and Waste to Energy
Coupling of incineration waste bed modelling and freeboard computational fluid dynamics simulation – A bed model sensitivity study
Adrian C. H. Lai, Nanyang Technological University, Singapore
Pyrolysis characteristics of sewage sludge for efficient recycling and energy recovery              
Gun-Ho Han, Yonsei University, South Korea
H2-rich syngas recovery and HCN removal via catalytic reforming of product gas from thermal degradation of polyurethanes over Ni/Mg/Al catalyst              
Shogo Kumagai, Tohoku University, Japan
Nano-carbon fiber synthesized in waste plastic gasification process and application as composite material         
Takashi Amemiya, Nippon Institute of Technology, Japan
Development and optimization of pilot-scale rotary kiln combustor for municipal solid waste incineration
Chelladurai Punithan, Indian Institute of Technology Madras, India

SESSION 13:  Life Cycle Assessment and Other Assessment Tools
Waste input-output analysis of prefectures in Japan to promote sound material cycles by using data in official reports collected for waste management
           
Yasushi Kondo, Waseda University, Japan
Application of material flow analysis and water quality modelling to facilitate of leachate management system
Tengku Nilan Baizura, University of Malaya, Malaysia
Municipal solid waste material flow in Bali province, Indonesia        
Elprida Agustina, Bandung Institute of Technology, Indonesia
Perceptive classification of combustible waste mixture: A Case survey in Japan
Nattapon Leeabai, Tokyo Institute of Technology, Japan
Flows, stocks, and generating factors of spray cans and cassette cylinders
Toshiyuki Tsunemitsu, Kyoto University, Japan

SESSION 14: Trade Restriction on Recyclable Waste and Recycling in Asia
The Background and the Impact of Chinas Import Restrictions of Recyclable Waste since 2017
Aya Yoshida, National Institute for Environmental Studies, Japan
Impact on Chinese Import Restriction on Recyclable Waste for Southeast Asian Countries
Dian Lutfiana, Economic Research Institute for ASEAN and East Asia (ERIA), Indonesia
Hikaru Shirai, Kyoto University, Japan

Michikazu Kojima, ERIA, Indonesia
Current Status and Issues of Recyclable Waste Trade in Thailand
So Sasaki, Chulalongkorn University, Thailand
Impact of Chinese Restriction Recyclable Waste in India
Amit Jain, IRG Systems South Asia Pvt. Ltd, India

POSTER PRESENTATIONS

P2-1: Electrochemical behavior of tungsten carbide-cobalt alloy using molten hydroxide under low temperature condition  
Phengxay Deevanhxay, National University of Laos, Lao PDR
P2-2: A study on TiO2-coated cenospheres for photocatalytic performance              
Jieun Jeong, Kongju National University, Korea
P2-3: Adsorption selectivity against zinc of amine modified mesoporous silica with different pore size
Tatsuo Nishihama, Nagoya University, Japan
P2-4: Preparation of magnetic BEA-type zeolite via dry-gel conversion method      
Vanseng Chounlamany, National University of Laos, Lao PDR
P2-5: Mechanical and structural properties for recycled thermoplastics    
Tsukasa Sato, National Institute of Technology, Tsuruoka College, Japan
P2-6: Identification of residual sludge due to high concentrations of Fe & Mn contained in bank filtrate
Daeyoung Kwon, Inje University, Korea
P3-1: Evaluation of different sewage sludges as a potential of biodiesel source        
Febrian Rizkianto, Kyoto University, Japan
P6-1: Enhancement of FOG biodegradation using bio-augmentation of Pseudomonas Putida in co-digestion of grease trap waste and excess MBR sludge        
Wilai Chiemchaisri, Kasetsart University, Thailand
P6-2: Lipid removal efficiency of bacteria isolated from wastewater in Khlong Hok area, Pathum Thani Province     
Jantima Teeka, Rajamangala University of Technology Thanyaburi, Thailand 
P6-3: Reduction in the amount of electricity generated by changes in breeding method of daily cows to free stalls on biogas production
Hitoshi Ogawa, Tamagawa University Research Institute, Japan
P6-4: Treatment of grease trap waste using bioaugmentation of yeast pure culture  
Wilai Chiemchaisri, Kasetsart University, Thailand
P7-1: Potentiality of in-house treatment for Khartoum state medical wastes             
Nagwa Fadl Bashir, Zamzam University College, Sudan
P8-1: Recovery of decane using vacuum swing adsorption              
Jeongmin Park, Chungbuk National University, Korea
P8-2: Mercury analysis for the adsorption of commercial activated carbon             
Sinang Choi, Chungbuk National University, Korea
P8-3: Mercury analysis for the adsorption of prepared activated carbon   
Sinang Choi, Chungbuk National University, Korea
P8-4: CO2 utilization using metal cation in seawater-based industrial wastewater    
Dongwoo Kang, Yonsei University, Korea
P8-5: Separation of Cl from vaporized KCl during its condensation            
Kohei Saito, Osaka Institute of Technology, Japan
P8-6: A new method for the recovery of high purity copper from plating wastes
Han S. Kim, Konkuk University, Korea
P9-1: Selective separation of landfill gas using hydroquinone clathrates    
Dongwon Lee, Kongju National University, Korea
P9-2: Greenhouse gas emission from two-stage membrane bioreactor treating municipal solid waste leachate              
Chart Chiemchaisri, Kasetsart University, Thailand
P9-3: Mass balance of heavy metals in one closed landfill site for incinerator residues in Japan
Yiqun Xiong, Kyoto University, Japan
P9-4: Evaluation of the geotechnical characteristics of waste disposal site in Thailand by the surface wave exploration             
Shuichi Nagaoka, Japan Environmental Sanitation Center, Japan
P9-5: A study on the environmental assessment of the closure and postclosure landfill in Korea         
Sangkeun Kim, Korea Institute of Construction Technology, Korea
P10-1: Effective capture of cesium iodide (CsI) by aluminosilicate sorbents for the treatment of radioactive gas from spent nuclear fuel               
Jae Hwan Yang, Chungnam National University, Korea
P10-2: Effect of pH in mercury re-emission           
Doah Kim, Chungbuk National University, Korea
P10-3: Flow characteristics in an electrostatic precipitator with fan operation time  
Dong-uk Kim, Chungbuk National University, Korea
P10-4: Flow Characteristics in an electrostatic precipitator at different environment               
Dong-uk Kim, Chungbuk National University, Korea
P10-5: Immobilization of toxic metals in MSWI fly ash by geopolymerization using incinerator bottom ash
Yuma Kawasaki, Kyoto University, Japan
P12-1: Separation of syngas (CO and H2) using polyamide composite membrane     
Jeeban Poudel
, Kongju National University, Korea
P12-2: Catalytic steam reforming of toluene in a DBD plasma reactor over SiO2 and ZSM-5 supported Fe-based catalysts         
Yifei Sun, Beihang University, China
P12-3: Influence of temperature on syngas production from pyrolysis of anaerobically digested sludge
Gabin Kim, Konkuk University, Korea
P12-4: Kofu-kyoto waste to energy plant stable operation record of fluidized-bed gasification and melting furnace       
Koki Yamashita, KOBELCO Eco-Solutions, Japan
P12-5: Investigation on formation of methane hydrate at moderate conditions for energy storage
Yuki Kamimoto, Nagoya University, Japan
P12-6: Pyrolysis characteristics of biomass and marine waste buoys mixture by thermogravimetric analysis
Soyoung Han, Korea Institute Machinery & Materials, Korea
P12-7: Characteristics of municipal solid waste as a source of SRF (Solid Refuse Fuel) generated From Daejeon metropolitan city, Korea               
Hongkyoung Kim, Chungnam National University, Korea
P12-8: An efficient treatment of mixed plastic wastes by SRF and pyrolysis process  
Hae Seung Lee, Gangwon State University, Korea
P12-9: Thermal destruction of Br-based compounds by monitoring of CO and mineralized Br             
Shodai Tagushi, Osaka Institute of Technology, Japan
P12-10: The catalyst properties for the high temperature water gas shift reaction depending on the concentration of precursor
Dae-Woon Jeong, Changwon National University, Korea
P13-1: The relationship between businesses’ handled amount and released/transferred amount of chemical substances according to the PRTR system      
Satoshi Mizutani, Osaka City University, Japan
P13-2: A study of HBCD levels and flow of products and waste materials in Korea
Yeji Jang, Chungnam National University, Korea
P13-3: Recycling and greenhouse gas reduction of used glass bottles by EPR in Korea
Yuree Kwon, Chungnam National University, Korea